Specifications

1.2 DTG TEX Textile Inks

Using Other Ink Brands

Your DTG Kiosk™ package included bottles of DTG TEX Textile Inks. This is a specially

formulated, water based pigment ink. DO NOT mix other ink brands with your DTG TEX Textile

inks. This can create major problems. While we strongly recommend you use only DTG TEX

Textile inks, if you do decide to try another brand of textile ink you must flush out the

complete ink system using a specially formulated flushing solution available from Impression

Technology

before putting another brand of ink into your system. Mixing inks, even a very small

amount, may cause severe and permanent clogging of the printing head.

Using Other Ink Types

Similarly, if you wish to change your ink type from DTG TEX to DTG UNI for printing on non-

textile materials (or vice-versa), you will need to thoroughly flush the DTG Kiosk™ ink system of

the old ink before charging with the new ink. Whilst this process is relatively straight-forward,

it will take approximately ½ - 1 hour of your time, and does “waste” a fair amount of ink.

Please Note:

Never attempt to use a non-water based ink in your DTG Kiosk™ – even mild solvent

based inks may cause irreparable damage to the ink tubes, ink valves or even the

print head.

Impression Technology cannot guarantee the performance of your DTG Kiosk

™ if

you choose to run any ink other than DTG TEX or DTG UNI in your DTG Kiosk™.