Smart Watch USER MANUAL DT3Promax Thank you for choosing our smart watch. You can fully understand the use and operation of the equipment by reading this manual. The company reserves the right to modify the contents of this manual without any prior notice. Package box contains: a packing box, a manual, a watch body, and a charging cable.
I.
1.1 Shortcut function: 1) Swipe to the left to find the "+" icon, click the icon to add part of the menu as a shortcut function. 2) Scroll down to find Bluetooth connection status, time, power, do not disturb mode, brightness adjustment and other functions. 3) Swipe to the right to display, time/date/week, the latest message (enter to view multiple messages)/turn on or off Bluetooth for calls and display some of the recently used menu functions.
5) Icon , to set the phone number of the emergency call. In the dial interface, long press the bar button to quickly make the emergency call. 6) Swipe left for more shortcut functions: GPS, mode selection, power saving mode, alarm, flashlight, SOS (in power saving mode, the brightness display will be slightly different) 1.
1.9.2 When the exercise time is longer than 1 minute, the exercise data can be saved; when the exercise is less than one minute, it will prompt "Too little data to save". 1.9.3 Newly added more exercise modes to choose from, such as gym, yoga, indoor running and free training. 1.9.4 Newly added the GPS movement track. When you start the sport function in the APP, the watch will enter the sport mode simultaneously.
Click on “Meteorology” on the watch to display the ultraviolet (UV) and air pressure conditions of the day. 2.8 Breathing There are three modes of breathing training: slow, moderate, and fast. Users can take the breath training based on the mode they select. 2.9 Massager Tap the green button to start the massage, and the watch is in a vibrating state, tap the red button to end the massage. 2.10 Time setting Disconnected from the APP and set the time function on the watch separately. 2.
1.2 For Android users: Search “WearPro” in Google Play or any customized Android Stores to download, pay attention to the phone pop-up box and tap “Agree” to give the permissions to the APP when installing; 1.3 For iOS users: Search “WearPro” in APP Store to download, pay attention to the phone pop-up box and tap “Agree” to give the permissions to the APP when installing; After WearPro is installed, the application icon is shown as: 2. Connect APP through mobile phone Bluetooth 2.
3. Connect to the audio/calling Bluetooth of the watch: Open the Bluetooth settings of your mobile phone, swipe to the right when the watch is on the dial interface, click the “BT call” icon, then click "Open" to see the name of the audio/calling Bluetooth.
Wear the watch correctly on your wrist (left/right hand). When you turn on “Tilt to wake” feature on the APP, the watch will light up automatically when you tilt your hand to look at the watch. 10. Do not disturb mode In the APP, tap “Device” > “More” > “Do not disturb mode”, set the start to end time, such as 12:00 to 14:00, then you won’t receive phone calls and apps notifications on the watch during this period. 11.
●Use and maintenance advice 1. Keep the device clean; 2. Keep the device dry; 3. Wear the watch correctly, do not wear the device too tightly; 4. Avoid prolonged exposure to extreme temperatures that are too cold or too hot, which may cause permanent damage to the device.
Customer Signature: Signature of Store Clerk: Stamp of Store: FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Shenzhen Xinkeying Technology Co., Ltd I hereby declare that the product Product name: Smart Watch Model:DT3Promax Series model :DT3Promax+,DT3Pro+,DT3+,DT3max+ Trademark: DT NO.I HW: V1.0 SW: V1.0.0 (Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU: and declare that the same application has not been lodged with any other notified body. ETSI EN 300 328 V2.2.
MANUFACTURER or AUTHORISED REPRESENTATIVE: Address: Shenzhen Xinkeying Technology Co., Ltd 8/F,Block C,Han's Innovation Building,Xili Road, Nanshan District,Shenzhen,China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact: Company: Shenzhen Xinkeying Technology Co.