User Manual DVI Pure Fiber Optic Extender Dual Link ODC Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643 USA Tel: 1-201-488-3232 Fax: 1-201-621-6118 www.purelinkAV.com For order support, please contact your Distributor or Reseller. For technical support, check with the Email: support@dtrovision.com Cautions: 1. Purelink logo is our own trademark of Dtrovision LLC.,Inc. 2. Any of the products may be changed without any notice in order to improve the function of the product. 3.
Package Content Each DVI Pure Fiber Optic Extender Dual Link package includes the following items; - ODC TX/RX Unit - DVI-D Dual Link Cable – 1.
Contents Contents 1-1 Description, General Specification 1-2 Environmental and Reliability Specifications 1-3 Main Features 1-4 Video Connection 1-5 Mechanical Specification 1-6 Technical Specification 1-7 Warranty Information 1-8 Troubleshooting 1-9 1-1 Contents
Description, General Specification Send DVI video signal and digital audio signal to long distance using pure fiber optic cable (multimode 8 strands) Owing to its compact size and low power design ODC connects monitors only for DVI-D dual link, PDP, and projectors at the lowest price ODC uses fully insulated fiber optic cable and is rarely affected by electronic wave or electric noise.
Environmental and Reliability Specifications Recommended environmental conditions for the operation are temperature range of 10°C~40°C, non-condensing humidity levels of 10%-80%, and altitude ceiling of 3,000 meters (9,840 feet).
Main Features High Quality Picture - No Signal Loss and Digital Noise Free Our ODC is built to deliver the highest quality picture preserving the native resolutions of the video sources without any signal loss. At the same time, the digital noises that may affect the picture quality will be eliminated.
Video Connection Step 1: Ensure the digital video/audio source and display is turned off Step 2: Connect the digital DVI-D Dual Link cable and fiber optic cable to ODC module Step 3: Connect power adapter to the transmitter (TX/RX) module of ODC Step 4: Connect power code to the power adapter and plug in to power outlet Step 5: Turn on the display Step 6: Turn on the source EDID data saving Step 1: Connect DVI Input port on ODC TX unit to display such monitor or HDTV Step 2: Push EDID S/W for 3~4 seconds St
Mechanical Specification Dimension: 125x111x35 mm / 4.9 „‟ x 4.4‟‟ x 1.
Technical Specification Data transmission speed: 3.3 Gbps (Per color) Digital Video Bandwidth: 25~268.5 Mhz Resolution: Up to QXGA (2560x1600)@60Hz / 1080P Input/output signal standard: Digital RGB, TMDS, SPDIF Maximum length: 2560*1600p -> 500m (1640ft) Optional -> 1000m (3280ft) Light Source: 850 nm Vcsel Fiber Optic cable: 50/125 & 62.
Warranty Information 2(Two) Year Warranty Dtrovision LLC warrants this DVI Pure Fiber Optic Extender Dual Link to be free from defects in workmanship and materials, under normal use and service, for a period of two (2) years from the date of purchase from Dtrovision LLC or its authorized resellers.
Troubleshooting The DVI Pure Fiber Optic Extender Dual Link is designed for years of trouble free service, please refer to the troubleshooting chart below if experiencing issues with the device. Problem Solution No picture(or signal) 1. Ensure the power LED is illuminated. 2. Check if TX or RX module is properly connected to sources or displays. 3. Check if fiber optic cable is properly connected. 4. Make sure that the display is only for DVI-D Dual Link 5.
