Instruction Manual

I_
505
_Aloxy Pulse
Instruction
Manual
EN
22
35
G. Installation using an external metal bracket on the spindle of a quarter-turn valve:
This method ensures excellent non-intrusive attachment of the Aloxy Pulse to the lever of a quarter-
turn valve. A typical application is manual valve position monitoring of small quarter-turn valves.
Step 3: Slide the Aloxy Pulse device in its mounting bracket
󱛻󱛼󱛽 CAUTION
Before sliding the Aloxy Pulse device in its mounting
bracket after installation, ensure the
mounting bracket is firmly attached on the asset and does not move when putting force in
any direction.
Position the Aloxy Pulse device on top of the mounting bracket slightly to the left-side so the hooks
below the Aloxy Pulse device align within the mounting bracket (a).
Slide the Aloxy Pulse device to the right-side until it locks in position (b). Check that the edges of the
Aloxy Pulse device perfectly align with the edges of the mounting bracket.
To remove the Aloxy Pulse device again from its mounting bracket after installation, put a
screwdriver or similar tool in the release slot to unlock the Aloxy Pulse device from the mounting
bracket. Gently pull the device to the left side while keeping the screwdriver in the release slot.