Instruction Manual

I_
505
_Aloxy Pulse
Instruction
Manual
EN
27
35
k (max.) 2.75 never more than 3,5mm!
Steps
Force
Insert the 4 screws
Hand
-
tighten the 4 screws clockwise
at
0
Nm
Tighten the 4 screws in a clockwise direction
at
0,
2 Nm
(
0.
15 ft lb)
Tighten the 4 screws in a clockwise direction
at
0,45 Nm
(
0.
33
ft lb)
Tighten the 4 screws
again
in a clockwise direction
at
0,45 Nm
(
0.
33
ft lb)
NOTICE
Device damage
The maximum torque of the gasket must not be exceeded.
Refer to the section "Technical specifications for the torque value.
 Do not exceed torque on screws regarding gasket
The Aloxy Pulse is ready for operational use and can be positioned in its mounting bracket as explained
in the previous chapter (step 3).
8 Disposal
Devices described in this manual should be recycled. They may not be disposed of in the
municipal waste disposal services according to the Directive 2012/19/EC on waste
electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally approved disposal
service for eco-friendly recycling. Observe the specific regulations valid in your country.
8.1 Technical support
If this documentation does not provide complete answers to any technical questions you may have,
contact Technical Support by addressing your questions to:
[e-mail]