User`s manual

7- VOLTAGE AND FREQUENCY

The DELTA 10 R ZOOM can operate at 90-260 VOLT 50 or 60 Hz.

8- INSTALLATION

DELTA 10 R ZOOM may be either floor or ceiling mounted.

For floor mounting installations, the DELTA 10 R ZOOM is supplied with four rubber mounting feet on

the base.

For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the

mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the weight of the

unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to

move or shake whilst the DELTA 10 R ZOOM is moving.

Four 1/4 turn Fast Locks connections placed in the base of the units allow to hang the DELTA 10 R ZOOM

by using the two Fast Lock ‘C’ clamps provided in the box.

8.1- Safety cable

We recommend the use of a safety chain/cord connected to the DELTA 10 R ZOOM and to the

suspension truss in order to avoid the fixture accidentally falling should the main fixing point fail.

Make sure that the iron cable or chain can bear the weight of the entire unit.

You may attach the safety chain/cord to the two holes (A) located on the base of the fixture, as shown in

the picture below.

8.2- Protection against liquids

The projector contains electric and electronic components which should under no circumstances come

into contact with oil, water or any other liquid. The proper unit functioning would be compromised

should this occur.

ARC 1200

DELTA 10 R ZOOM