Datasheet

14- AUTOMATIC OPERATION (AUTO)
DELTA 8 R can work in automatic mode without a DMX controller. First of all connect the projectors with
a DMX cable (picture below). A maximum quantity of 32 slave units can be connected to the same
Master unit.
To activate Auto mode on the first unit, use the menu to run through the different modes until AUTO
appears on the display, and press enter.
Now it is possible to choose between the different pre-programmed games (
). To confirm game activation press ENTER on
the selected GAME.
By setting all the units connected to the MASTER, to DMX address 1, them will be sinchronized with the
Master unit following the chase selected on it, including TIME, WAIT, Pan and Tilt position of the
MASTER unit.
MASTER/SLAVE
The first unit that will function as a Master must be set to Automatic mode (AUTO), the other units must
be set to SLAVE mode (selectable through the menu) and DMX address 1. In this way all the Slave units
will be sinchronized with the Master unit following the chase selected on it, but running their own
Pan&Tilt position.
STEP 01/16, PERSONAL
COLOURS, RAINBOW, FIXED COLOURS, WHITE MACROS
MASTER SLAVE 1 SLAVE 2 SLAVE 3 SLAVE 32
DELTA 8 R
21