Installation manual

10
INSTALLATION DIAGRAMS
Brackets for the DTS Timecode Reader, 70mm permanent or 35mm/70mm switchable. If
switchable desired, breakaway adapters needed on brackets and readers.
•
••
• D625 – Standard Breakaway Bracket
For projectors: Century, Simplex, and Cinemeccanica with Kelmar bracket. Intended to fit
between the projector and reel arm. Readers must have D626 or D627. No bracket breakaway
adapter needed. Made using American standard size hole to accommodate 2” center spacing
3/8 - 16 tap that is utilized to mount the American made upper reel arms.
Hardware included:
Application QTY Description
35mm 2 10-24 x 1/2” Phillips screws
35mm 2 3/4 x 16 x 1” hex bolt nuts
35mm / 70mm 2 3/8 lock washers
70mm 2 3/8 x 1
1/2” Phillips screws
70mm 2 3/8 flat washers
70mm 2 3/8 hex nuts
•
••
• 5006-0001-00 Cinemeccanica Adapter Plate
For Cinemeccania projectors. Used to allow the use of the D625 standard bracket. If the reel
arm needs to be remounted, two plates are required.
•
••
• D615 - DP70 Universal Bracket
Used for American projectors with a penthouse. Needs D628 adapter plate for breakaway use.
Comes with tap and drill bit 8-32, and the following hardware:
QTY Description
2 10-24 x 1/2” Phillips screws
2 3/4 x 16 x 1” hex bolt nuts
2 3/8 lock washers
•
••
• D616 - AA2 bracket
For Norelco AA projectors. Needs D628 adapter plate for breakaway use. Hardware included:
QTY Description
2 #10 lock washers
3 5/16 x 18 x 5” Phillips screws
3 3/8 lock washers
2 10-24 x 1/2” Phillips screws
•
••
• D617 – “L” Bracket
For Kinoton, Norelco DP75 projectors. Needs D628 adapter plate for breakaway use
•
••
• D628 - Breakaway Adapter Plate for Brackets
Used to mount the DTS timecode reader to the side of the projector. Comes with same
hardware as the D625. Adapts D617 for breakaway use. Reader must have D626 or D627.
Hardware included: Qty 2, 10-24 x ¾” flat head Phillips screws.
•
••
• D626 - Spacer (breakaway adapter) Plate for DTS 35mm Reader. Hardware included:
Qty 2, 10-24 x 1 ¼” flat head Phillips screws.
•
••
• D627 - Spacer (breakaway adapter) Plate for DTS 70mm Reader. Hardware included:
Qty 2, 10-24 x 5/8” flat head Phillips screws.