- USER MANUAL MODIX HD-2510

-17-
.Enter'5'to③ chan ge the curr ent dis k dr ive and press 'ENTER'.
. Select the drive you want to install and format, in this example disk '2' but note that this④
may vary from your setup!
⌕ If you can not see the external hard drive at this po int, please check your jum per settings,
cable connection, power supply and if required, the driver installation.
For 2.5" Hard Drive, you can also connect the drive directly to your internal IDE⌕ bu s if you
encounter problems with the external drive and install it later formatting.
. Choose '1' to⑤ create a primary DOS partition and follow the on screen instructions. After you
have created the partition according to your requirement, close the MS-DOS command
prompt by typing 'exit' and press 'ENTER'.