- USER MANUAL MODIX HD-2510

-33-
More questions and answers are available from our website.
Just visit the support site at: www.MODIX.co.kr
Why can't I se e the drive in the file man ager after I reb o o t my computer?
󰏊 Make sure the assembled HDD is installe d correctly, and that the USB cable is conne cted①
to your computer. It may because the USB 2.0 driver is not installed correctly. Re-install②
the driver and reboot your computer. The hard disk is not formatted and formats your hard③
disk drive with FAT32 formatter downloaded from our homepage.
D river i s not displayed or an..! Icon is displayed to the left of the driver in the device manager.
󰏊 Player is no t connected properly. Check that the USB cable is fully inserted i nto the USB①
port. The support software is not properly installed. UNINSTALL the USB driver once and②
reinstall it again.
Why can't I see the drive in the f ile manag er after installing the USB 2.0 driver under Windows
98 ?
󰏊 Click the "start" icon located in the lower left corner of the Windows task bar. Click on①
"Settings", then "Control Panel". Select and click on "System" in the "Control Panel" window.
From the "System Properties" window, click on "Hard disk controllers". Select the new HDD②
unit with the right mouse button to view the "Properties" screen. Select "Disable this hardware
profile" in "D evice usage". Click "OK".
I got a message that "Th e gener ic U SB Hub is a HI-SPEED USB d evice and will function at reduced
speed when plugged into a non hi-speed port. There are no HI-SPEED USB host controllers
installed on this computer. You must add a HI-SPE ED host controller to this computer to obtain
max imum per forman ce ." in XP.
󰏊 In order to reach USB 2.0 speed, you must have a computer or host adapter card that has
USB 2.0 support.
TV is blank screen or distorted?
󰏊 Be sure to set the TV to the correct video input type(AV Mode) and channel. Refer to the
equipment owner's manual for detail. And press N/P button repeatedly to show the normal
screen by this time until you see the menu again.
My picture is in black and white?
󰏊 Enter the setup menu and go to the video menu and change the settings here to fit your TV
screen, this usually happens if the player is set to use s-video instead of Component.