User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-34-
5.5.2 Login
After powering up, the front panel will display ‘‘ ”
Note: The L54 logs the operator out of the front panel after a period of inactivity longer than 30
minutes.
5.5.3 Device ID Code
• When the panel display ,use the and keys on the IDU
until the panel display “
”press ENT to ready set the device ID
code.
• Use the
, and _keys on the IDU to select a different link ID code in the range 1-255.
• Press ENT to set the link ID code.
• The IDU will display the new setting.
 The Local ID’s number and the IP adress of device is this same.
5.5.4 Capacity configure
This RF bandwidth is 28MHz, note the frequency plan. The IDU will display
.
4/8/16E1 service card configure:
• Use the and _keys on the IDU until the panel display “ ”.
• Use the
_keys on the IDU to select SET menu, press ENT.
• Use the
_key on the IDU to select display
press ENT.
• Use the
and _keys on the IDU to select the required capacity.