User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-37-
5.5.7 Tributary Configuration
Configurations for 4/8/16E1 service card and 10/100BASE-T+1/2/4E1:
Step 1: Configure tributarys of Group A
• Use the
and _keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select “1” menu.
• Use the
and _keys on the IDU to select the required status of tributary #1. If tributary #1
should be used, select US, otherwise select NO.
• Use the
keys on the IDU to select “2” menu.
• Use the
and _keys on the IDU to select the required status of tributary #2. If tributary #2
should be used, select US, otherwise select NO.
• Use
the keys on the IDU to select “3” menu.
• Use the
and _keys on the IDU to select the required status of tributary #3. If tributary #3
should be used, select US, otherwise select NO.
• Use the
keys on the IDU to select “4” menu.
• Use the
and _keys on the IDU to select the required status of tributary #4. If tributary #4
should be used, select US, otherwise select NO.
• Press ENT to set the tributary #1 to #4 of group A.
The L54 terminal is now set up and running. The operator may leave the keypad as the
L54 will automatically log out the keypad if no activity has taken place within a 30 minute
period.
Set up the remote L54 terminal in the same manner as described above.
When the antennas are aligned, the L54 link will be ready to pass operational traffic.