User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-5-
2.2 Features
• High perfermance and integrated design incorporating high & new technology
• Minimal installation time
• Single coaxial cable connection between Indoor and Outdoor Units
• Adjustable transmit output power
• Frequency/channel setting via LCD panel or NMS
• Diagnostic loopbacks accessible via LCD panel or NMS
• 253 different Device ID codes
• Selectable traffic capacity
• The same IDU support all different service pulgin, such as 4/8/16E1, 10/100BASE-T
• Software adaptive service pulg in
• Auxiliary Alarm input and Relays output
• Digital Modulator and Demodulator, Forward-Error-Correction (FEC)
• High sensitivity and high system gain
• Low power consumption, use 3.3V and 1.5V working voltage
• Standard radio IF frequencies on the cable: 310MHz/70MHz
• No cable length settings or adjustments required, RG-6/U cable up to 100m
• Protection Switch Option available
• SNMP (NMI) Option available
• WEB Server supported for network management
• 1 Rack Unit (RU) high, 19” wide
• The same IDU support all different service pulgin
• 4 external alarm input sensor as standard
• 5 alarm relay outputs as standard
• Front panel keypad access to control and diagnostics features
Control:
• Link Capacity select
• Frequency of operation
• Transmitter Power adjustment
• Dvice ID
• Tributary status
• Transmitter On/Off
• ATPC
Diagnostics:
• Beep and Light Alarm
• RSSI
• Current BER
• Alarm summary status
• Transmitter Power Status
• Auto Locate Alarm and display