User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-50-
Configure group A:
• Use the
and keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select “1” menu.
• Use the
and _keys on the IDU to select the required status of tributary #1. If tributary
#1 should be used, select US, otherwise select NO.
• Use the
keys on the IDU to select “2” menu.
• Use the
and _keys on the IDU to select the required status of tributary #2. If tributary
#2 should be used, select US, otherwise select NO.
• Use the
keys on the IDU to select “3” menu.
• Use the
and _keys on the IDU to select the required status of tributary #3. If tributary
#3 should be used, select US, otherwise select NO.
• Use the
keys on the IDU to select “4” menu.
• Use the
and _keys on the IDU to select the required status of tributary #4. If tributary
#4 should be used, select US, otherwise select NO.
Press ENT to set the tributary #1 to #4 of group A.
Configure Group B, C, D:
• Use the
key on the IDU until the panel display “ ”
And “
” and “ ”, use the same way of
configure group A to configure group B, C and D.
For 10/100BASE-T+1/2/4E1 service card, the number of tributaries in 4/8/16E1 service card is 4
maximum. Only one group of tribs should be configured. The group is shown as “E1” in the screen of
setting. The parameters and options defined for 10/100BASE-T+1/2/4E1 service card are same as
defined for 4/8/16E1 service card.