User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-51-
These parameters are stored in EEPROM.
• Use the
and _keys on the IDU until the panel display
“
”, press ENT.
• Use the
keys on the IDU to select “dBm” menu, press ENT .
• Use the
keys on the IDU to select the required transmit power.
• Press ENT to set the transmit power.
• The IDU will display the new setting.
• Use the
keys on the IDU to select “OFF/ON” menu, press ENT.
• Use the
and _keys on the IDU to select ON or OFF.
• Press ENT to set the transmit power is ON or OFF.
• The IDU will display the new setting.
This screen shows two parameters of ATPC. The first parameter is the option of the value of
ATPC level. The second parameter is the option of switching the ATPC on or off.
The local IDU sets remote transmission power to control local RSSI is in range of ATPC level
+/-5dB.
These parameters are stored in EEPROM.