User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-52-
• Use the and keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select “dBm” menu, press ENT.
• Use the
. keys on the IDU to select the required ATPC level.
• Press ENT to set the ATPC level.
• The IDU will display the new setting.
• Use the
keys on the IDU to select “OFF/ON” menu, press ENT.
• Use the
and _keys on the IDU to select ON or OFF.
• Press ENT to set the ATPC is ON or OFF.
• The IDU will display the new setting.
This screen shows the parameter of BER alarm threshold. The options are 1E-3, 1E-4, 1E-5 and
1E-6(prefer to section 9.2).
These parameters are stored in EEPROM.
• Use the
and keys on the IDU until the panel display “ ”,
press ENT.
• Use the
and _keys on the IDU to select 1E-3, 1E-4, 1E-5 or 1E-6.
• Press ENT to set the BER alarm threshold.
• The IDU will display the new setting.
This screen shows transmit power alarm threshold. Alarm will occurs when transmit power is
lower than alarm threshold.
These parameters are stored in EEPROM.