User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-53-
• Use the and _keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select the transmit power alarm threshold.
• Press ENT to set the threshold.
• The IDU will display the new setting.
This screen shows RSL alarm threshold. Alarm will occurs when RF received level is lower than
the alarm threshold.
These parameters are stored in EEPROM.
• Use the
and _keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select the RSL alarm threshold.
• Press ENT to set the threshold.
• The IDU will display the new setting.
This screen shows two parameters of alarm options: J-LCD Alarm and Beep Alarm.
The LCD will show and flicker the screens witch alarm occurred when the option of J-LCD
Alarm is ON and no press any key for 20 seconds. And the LCD will show resently screen for J-LCD
Alarm is OFF.
The Beeper can be closed when Beep Alarm is OFF.
These parameters are stored in EEPROM.