User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-54-
6.1.3 OTHERS
The Others menu has serveral screens for displaying or modifying the other parameters listed
below:
This screen shows 4 alarm inputs.
The alarm input is located in the local IDU DB25 ALARM RELAYS connector (see Table 4-5).
“IN” means alarm condition occurred.
“NO” means alarm condition not occurred.
This screen shows 5 relay outputs.
The relay output is located in the local IDU DB25 ALARM RELAYS connector (see Table 4-5).
“On” means the relay is open.
“Of” means the relay is closed.
This screen shows temperature of IDU and ODU, O: (ODU) and I: ( IDU)..
There have 5 screens to show alarm relays configure in local: Relay 1, Relay 2, Relay 3, Relay 4
and Relay 5.
The relay output can be configured with multi alarm conditions. These conditions are relative of
“OR”.
The alarm conditions are listed in Table 6-2.