User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-84-
8.2 Connectors
The connectors of NMS in IDU are: RS232 and Ethernet listed below:
Figure 8-3 NMS connector on IDU
The RS232 for software update use RJ-45 connector.
The Ethernet for SNMP/NMS use RJ-45 connector.
8.3 Installation
8.3.1 Installation Equipment Required
8.3.1.1 Tools
A basic electrician’s toolkit.
8.3.1.2 Equipment
Items included with SNMP/WEB NMS:
Standard Ethernet cable
8.3.2 Installation Procedure
Connect the Ethernet cables to the Ethernet port on the IDU. For management via a network, a
standard Ethernet cable is used to connect to a hub, switch or any other Ethernet equipment. For a
laptop computer, a standard Ethernet cable with an RJ45 connector is used.