CT D.T.S. Illuminazione s.r.l. Via Fagnano Selve 10/12/14 47843 Misano Adriatico (RN) ITALIA Tel +39 0541 611131 Fax +39 0541 611111 Made in Italy info@dts-lighting.it http://www.dts-lighting.
Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della D.T.S . D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto. D.T.
INDEX: 1-SYMBOLS 2- GENERAL WARNING 3- GENERAL WARRANTY CONDITION 4- TECHNICAL FEATURES 5- TECHNICAL SPECIFICATIONS 6- ACCESSORIES 7- IMPORTANT SAFETY INFORMATION 7.1 Fire prevention 7.2 Prevention of electric shock 7.3 Safety 7.4 Level of protection against the penetration of solid and liquid objects 8- VOLTAGE AND FREQUENCY 9- INSTALLATION 9.1 Safety cable 9.2 Protection against liquids 9.3 Movement 9.4 Risk of fire 9.5 Forced ventilation 9.6 Ambient temperature 10- MAINS CONNECTION 10.
1- SYMBOLS Graphic symbols used on this manual THIS SYMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK ! F 0,5M THIS SYMBOL INDICATES GENERAL RISK THIS SYMBOL MEANS “DO NOT PLACE THE UNIT ON INFLAMMABLE SURFACES” THIS SYMBOL INDICATES THE MINIMUM DISTANCE TO BE KEPT BETWEEN THE DEVICE AND THE LIT OBJECT 2- GENERAL WARNING Read the instruction contained in this user manual carefully, as they give important information regarding safety during installation , use and maintenance.
4- TECHNICAL FEATURES Overview NICK NRG 1200 CT is the most efficient LED moving head wash light ever produced. The exceptional brightness / consumption ratio makes NICK NRG 1200 CT a truly “green” fixture. NICK NRG 1200 CT is equipped with 30 high-power Full White LEDs, 5.600 °K. NICK NRG 1200 CT features three interchangeable lens fittings: Spot, Medium Flood and Wide Flood and ultra-fast silent Pan / Tilt.
DMX 20 DMX channels Pan & Tilt * 16-bit movement resolution * Ultra-fast movement: Pan 540° (2 sec.); Tilt 270° (1,2 sec.
5- TECHNICAL SPECIFICATIONS Dimensions Packaging Dimensions (LxWxH) 530 x 430 x 414 mm Weight: 12 Kg 369 mm 413 mm 369x218x497 mm 497 mm Unit Dimensions (LxWxH) Weight: 9,5 Kg 6- ACCESSORIES 306 mm 218 mm As standard • 1 x POWERCON male cable connector (cod. 0520P014) • 1 x XLR 5 Pins Male cable connector by Neutrik (cod. 0508B066) • 1 x XLR 5 Pins Female cable connector by Neutrik (cod. 0508B065) • “C” Clamp GQUICK with “Fast Lock” connection 1/4 turn (cod.
7- IMPORTANT SAFETY INFORMATION 7.1 Fire prevention: -Never locate the fixture on any flammable surface. -Minimum distance from flammable materials: 1 MT. F -Minimum distance from the closest illuminable surface: 0,5 MT. 0,5M -Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if there is any doubt. -Connect the projector to mains power via a thermal magnetic circuit breaker. 7.2 Prevention of electric shock: -High voltage is present inside the unit.
8- VOLTAGE AND FREQUENCY The NICK NRG 1200 CT can operate at 90-260 VOLT 50 or 60 Hz. 9- INSTALLATION NICK NRG 1200 CT may be either floor or ceiling mounted. For floor mounting installations, the NICK NRG 1200 CT is supplied with four rubber mounting feet on the base. For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the mounting surface.
9.2 Protection against liquids ! The projector contains electric and electronic components which should under no circumstances come into contact with oil, water or any other liquid. The proper unit functioning would be compromised should this occur. 9.3- Movement Ultra-fast movement: Pan 540° (2,0 sec.); Tilt 270° (1,2 sec.) 270° ! WARNING Do not place any object in the path of the projector’s movement 540° 9.
10- MAINS CONNECTION NICK NRG 1200 CT operate at 90-260 VOLT 50-60 Hz. Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly matches the mains supply available. For connection purposes, ensure that your plug is capable of supporting 2 amps at 230V, or 5 amps at 90 V. Strict adherence to regulatory norms is strongly recommended. MAINS AC OUTPUT 90 – 260 V 50 / 60 Hz (16A Max) MAX 10 NICK NRG 1200 UNITS @ 230V MAX 5 NICK NRG 1200 UNITS @ 120V Cod. 03.
11- DMX SIGNAL CONNECTION The unit operates using the digital DMX 512 (1990) signal. Connection between the mixer and the projector or between projectors must be carried out using a two pair screened ø 0.5 mm cable and a XLR 5 or 3 pins connector. Ensure that the conductors do not touch each other. Do not connect the cable ground to the XLR chassy. The plug housing must be isolated.
11.1-DMX Addresses NICK NRG 1200 CT can be controlled with 20 DMX channels. In order to use the unit in 20 channels, set the following addresses on the mixer: Projector 1 Projector 2 Projector 3 ….. projector 6 A001 A021 A041 A…. A101 If you want to select the next projector, just add “20” 11.2-Selecting the DMX address 1) Press the UP-DOWN key until you reach the required DMX channel. The numbers on the display will start to flash (but the new DMX address hasn't yet been set).
13- DISPLAY FUNCTIONS 2dBi IP20 omnid. antenna DISPLAY WIRELESS DMX RECEIVER RETROFIT 03.LA.126 MENU ENTER UP DOWN DMX IN DMX OUT Cod. 03.LDR008.FW12WS Cod. 03.LDR008.FW25WS Cod. 03.LDR008.FW45WS DMX OUT MAINS AC OUTPUT 90-260V 50 / 60 Hz (16A Max) DMX IN 03.LDR008.FW12 Cod. 03.LDR008.FW12 03.LDR008.FW25 Cod. 03.LDR008.FW25 Cod. 03.LDR008.FW45 03.LDR008.F12 03.LDR008.
13- DISPLAY FUNCTIONS Software version 1.10 Menu Up-Down Display ENTER Up-Down DISPLAY POSITION DISPLAY POSITION / STAND BY Display Position: Reverses display's reading depending on the mounting position (on the ground or suspended). Display Standby: To turn off the display (after 5 seconds) or leave it always on.
13- DISPLAY FUNCTIONS Menu Up-Down LED ENTER Up-Down NICK NRG 1200 FULLCOLOUR: RGBA MINIMUM VALUES This menu allow to select the minimum levels for Red, Green, Blue and Amber/White NICK NRG 1200 CT: 4 x WHITE MINIMUM VALUES This menu allow to select the minimum levels for Red = White 1, Green = White 2, Blue = White 3 and Amber/White = White 4 NICK NRG 1200 FULLCOLOUR: RGBA MAXIMUM VALUES This menu allow to select the maximum levels for Red, Green, Blue and Amber/White These settings have priority
13- DISPLAY FUNCTIONS GAMMA CORRECTION This menu allow to select between Linear current output or Quadratic current output for LEDs Default = Quadratic DMX LED SET GAMMA DMX MODE CORR. QUAD 20 ch MENU ENTER DOWN OUTPUT FREQUENCY This menu allow to adjust the PWM frequency value (Hz) in order to reduce flickering in the process of your camera recordings OUTPUT DMX MODE FREQ.
13- DISPLAY FUNCTIONS FIXED COLOURS Sixteen Colour Macros as on “MACRO” channel. Dimmer, Shutter, Pan and Tilt values selectable by user. WHITE MACROS (Active only on NICK NRG 1200 FULLCOLOUR) Sixteen macros for White colour (active only on NICK NRG 1200 FULLCOLOUR); White Macros for NICK NRG 1200 CT: Different white light Intensity. Dimmer, Shutter, Pan and Tilt values selectable by user. Menu Up-Down SLAVE ENTER Up-Down AUTO-FIXED DMX SETCOL.
13- DISPLAY FUNCTIONS Menu Up-Down WIRELESS ENTER Up-Down WIRELESS DMX SET SELECTION DMX MODE WIRELESS DMX Wieless DMX enabled / disabled. By activating WDMX MODE, it will be possible to control NICK NRG 1200 CT via D.T.S. ANTENNA Wireless DMX Transmitter (cod. 03.E1271). Wireless DMX Receiver Kit (Cod. 03.LA.126) on NICK NRG 1200 CT is available on request.
13- DISPLAY FUNCTIONS Menu Up-Down EMERGENCY ENTER Up-Down EMERGENCY DMX SET SELECTION DMX MODE EMERGENCY Emergency operating mode. By setting Emergency mode, it will be possible to select one of the 16 pre-programmed WHITE cues (active only on NICK NRG 1200 FULLCOLOUR; NICK NRG 1200 CT will show only different white light intensity) that will then ran if DMX signal is missing or not available. Useful for Emergency EXIT illumination on public areas.
13- DISPLAY FUNCTIONS Menu Up-Down DEFAULT SET ENTER Up-Down DEFAULT DMX SET SET ENTER DMX MODE DEFAULT SETTINGS To restore default settings 20 ch UP MENU ENTER DOWN DEFAULT DMX SET SET DMX SURE? MODE Menu - NO Enter - YES 20 ch UP MENU ENTER DOWN Menu Up-Down TEMPER. °C ENTER TEMPER. DMX SET°C DMX MODE TEMPERATURE Unit temperature 028.
13- DISPLAY FUNCTIONS Menu Up-Down SYSTEM DMX SYSTEM SET ENTER Up-Down PAN INVERSION / TILT INVERSION / PAN SPEED / TILT SPEED / FAN MAX SPEED / RESET BY DMX / MOTORS FIRMWARE UPGRADE. PAN INVERSION This menu allows to set the Pan movement. Normal or Reversed. TILT INVERTION This menu allows to set the Tilt movement. Normal or Reversed. PAN SPEED Pan Speed control (1-8) TILT SPEED Tilt Speed control (1-8) FAN MAX SPEED This menu’ allow to select the internal fans speed.
13- DISPLAY FUNCTIONS Menu Up-Down SOFTWARE ENTER Up-Down SOFTWARE LEDs circuit board software, MOTORS circuit boards software (Pan&Tilt) SOFTWARE DMX SET DMXLED MODE LEDs CIRCUIT BOARD SOFTWARE ENTER 20 ch Id 0D1307C1 v1.10 Jun 13 2012 MENU ENTER DOWN UP SOFTWARE DMX SET DMX Motors MODE 20 ch MOTORS CIRCUIT BOARDS SOFTWARE (PAN&TILT) Pan/Tilt v.13 MENU ENTER DOWN UP 14- PERIODIC CLEANING Front lenses Glass The dust can reduce the luminous output substantially.
16- DMX PROTOCOL 20 CHANNELS MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PAN msb 540° PAN Isb TILT msb 270° TILT Isb SPEED MOVEMENT NO FUNCTION NO FUNCTION SHUTTER DIMMER RED = WHITE 1 GREEN = WHITE 2 BLUE = WHITE 3 WHITE = WHITE 4 WHITE PRE-PROGRAMMED (Not Active) CTC MACRO (Not Active) FUNCTION (Recall, Create and Store the Custom white) NO FUNCTION NO FUNCTION RESET DMX CHANNEL 1 Parameter: PAN msb DMX CHANNEL 2 Parameter: PAN lsb DMX CHANNEL 3 Parameter: TILT msb DMX CHANNEL
DMX CHANNEL 6 DMX range Value Mid Point DMX value Parameter: NO FUNCTION Move Range (degrees) Mode 000-255 NO FUNCTION DMX CHANNEL 7 DMX range Value Mid Point DMX value Parameter: NO FUNCTION Move Range (degrees) Mode Option 000-255 8 DMX range Value Mid Point DMX value Parameter: SHUTTER Move Range (degrees) Mode Black-out Open Black-out Strobe (from 3.27 s to 30 ms) Pulse up (from 42.6 s to 120 ms) Pulse down (from 42.
DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL 11 Parameter: GREEN = WHITE 2 Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 12 Parameter: BLUE = WHITE 3 Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 13 Parameter: WHITE = WHITE 4 Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 14 Parameter: WHITE PRE-
DMX CHANNEL IF: Menu Up-Down 16 Parameter: MACRO (NICK NRG 1200 CT WILL SHOW ONLY DIFFERENT WHITE LIGHT INTENSITY) DMX SET ENTER Up-Down MACRO ENTER Up-Down STD ENTER 000-014 015-029 030-044 045-059 060-074 075-089 090-104 105-119 120-134 135-149 150-164 165-179 180-194 195-209 210-225 226-239 240-255 DMX CHANNEL IF: Menu Up-Down 000-014 015-024 025-034 035-044 045-054 055-064 065-074 075-084 085-094 095-104 105-114 115-124 125-134 135-144 145-154 155-164 165-174 175-184 185-194 195-204 2
DMX CHANNEL DMX range Value 17 Parameter: FUNCTIONS (Recall, Create and Store the Custom white) Mid Point DMX Move Range Mode Option value (degrees) IF CHANNEL 14 WHITE PREPROGRAMMED = DMX range value 156 – 205) 000-079 Custom White Recall Custom White Create (Enable Custom White Creation) Custom White Store (Store the Custom White created) 080-160 161-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-015 016-255 Function 18 Paramet
NOTES
NOTES
NOTES
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S.
