User manual

8- VOLTAGE AND FREQUENCY

The RAPTOR with electronic ballast can operate at 90-260V 50 or 60 Hz.

9- INSTALLATION

RAPTOR may be either floor or ceiling mounted.

For floor mounting installations, the RAPTOR is supplied with four rubber mounting

feet on the base.

For ceiling mounted installations, we reccomend the use of appropriate clamps to fix

the unit to the mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the

weight of the unit, as should any clamps used to hang it.

The structure should also be sufficiently rigid so as not to move or shake whilst the

RAPTOR is moving.

Four 1/4 turn Fast Locks connections placed in the base of the unit allow to hang the

RAPTOR by using the two omega clamps (provided in the box) in conjunction with

fixing clamps for truss (fixing clamps are not included into the unit box).