User manual

29
16- PAN SPEED & TILT SPEED
You can set the PAN and TILT motors at high speed on your RAPTOR.
Press menu until you see PAN SPEED / TILT SPEED.
Press ENTER and select a speed with UP-DOWN (there are 8 speeds).
Confirm by pressing ENTER.
17- OPENING THE PROJECTOR HOUSING
It is possible to inspect the inside of the projector by removing the cover as indicated
below.
ATTENTION
REMOVE MAINS POWER PRIOR TO ACCESSING THE
PROJECTOR’S INTERNAL COMPONENTS.
1) Loosen the 3 “¼ turn” screws which fix the head covers on both sides (picture 1) .
2) Once loosened the screws, simply lift the covers to access the internal components
(picture 2).
PICTURE 1 PICTURE 2