SCENA LED 80 FC SCENA LED 80 PC FC SCENA LED 80 FR FC User’s Manual rel. 1.0 GB D.T.S. Illuminazione s.r.l. – ITALY http://www.dts-lighting.
Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della D.T.S . D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto. D.T.
INDEX: 1- SYMBOLS ................................................................................................................. 4 2- GENERAL WARNING .............................................................................................. 4 3- GENERAL WARRANTY CONDITIONS .................................................................... 4 4- TECHNICAL FEATURES ......................................................................................... 5 5- ACCESSORIES ...........................
1- SYMBOLS Graphic symbols used on this manual: THIS SYMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK ! THIS SYMBOL INDICATES GENERAL RISK THIS SYMBOL MEANS YOU CAN PLACE THE UNIT ON NORMALLY FLAMMABLE SURFACES LED 30 cm THIS SYMBOL INDICATES THE MINIMUM DISTANCE TO BE KEPT BETWEEN THE UNIT AND THE ILLUMINATED OBJECTS THIS SYMBOL INDICATES THE EUROPEAN COMMUNITY DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) 2- GENERAL WARNING Read the instructio
4- TECHNICAL FEATURES OVERVIEW SCENA LED 80 FC is a compact, lightweight, DMX-controlled LED projector equipped with an high-power Full Colour (RGBW) LED featuring 4 LED channels (Red / Green / Blue / White); 3660 Total Lumens. The unit in available in two models: SCENA LED 80 PC FC, featuring a Ø 90 mm PC lens, and a long excursion 10°-76° linear zoom with high-efficiency optical system, enabling it to be used as a PC Beam or a very wide Wash (4245 Lux / 2 m).
DIMENSIONS 5- ACCESSORIES As standard 1 x User’s Manual 1 x POWERCON male cable connector (D.T.S. Code 0520P014) 1 x XLR 5 pins male cable connector (D.T.S. Code 0508B028) 1 x XLR 5 pins female cable connector (D.T.S. Code 0508B027) 1 x Filterframe for SCENA COMPACT *Black finish (D.T.S. Code 02M00422.46) Optional (on request) - “C” Clamp G50 (Max. Load. 10 Kg) *Black finish (D.T.S. Code 0521A012) - “C” Clamp G60 (Max. Load. 50 Kg) *Black finish (D.T.S.
6- IMPORTANT SAFETY INFORMATION 6.1 Fire prevention: It is permissible to place the unit on normally flammable surfaces. Suitable for mounting on normally flammable materials surfaces greater than 200°C with some combustion time lag. Minimum distance from the closest illuminable surface: 30 cm. Replace any blown or damaged fuses only with those of identical value (2AT). 6.2 Prevention from electric shock: High voltage is present inside the unit.
7- INPUT / OUTPUT CONNECTIONS DISPLAY PANEL DMX INPUT XLR 5 Pins Male Panel Connector DMX OUTPUT XLR 5 Pins Female Panel Connector FUSE 2AT MAINS AC INPUT 90-260V, 50/60 Hz MAINS AC OUTPUT 90-260V, 50/60 Hz MAX 16A
8- DMX SIGNAL CONNECTION: The unit operates using a digital DMX 512 signal. Connection between the controller and the unit or between units must be carried out using a two pair screened ø 0.5 mm. Ensure that the conductors do not touch each other. Do not connect the cable ground to the DMX connector chassis. The plug housing must be isolated.
8.1 DMX addresses SCENA LED 80 FC can be controlled with 10 DMX channels (Default). In order to use the unit in 10 DMX channels mode, set the following addresses on the mixer: Projector 1 Projector 2 Projector 3 ….. A…. projector 6 A001 A011 A021 If you want to select the next projector, just add “10” A051 8.2 Selecting the DMX address 1) Press the UP-DOWN key until you reach the required DMX address. The numbers on the display will start to flash (but the new DMX address hasn't yet been set).
10- DISPLAY FUNCTIONS DISPLAY FUNCTIONS The SCENA LED 80 FC display panel shows all the available functions. Using these functions, it is possible to change some of the parameters and add some functions. Changing the D.T.S. setting can vary the functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully follow the instructions below before carrying out any variations or selections. NOTE: the symbol shows which key has to be pushed to obtain the desired function.
MENU Up-Down ENTER LED RGBW Min/Max, Smooth, Compression, Sync and Boost level values settings RGBW MINIMUM VALUE This menu allows to select the minimum levels for Red, Green, Blue and White RGBW MAXIMUM VALUE This menu allows to select the maximum levels for Red, Green, Blue and White These settings have priority on Master Dimmer channel SMOOTH VALUE This menu allows to select the value of the delay (in milliseconds) for Dimmer channel reaction to DMX or Program variation.
MENU Up-Down ENTER ENTER AUTOMATIC MODE Automatic demo game without DMX controller Up-Down ENTER Up-Down ENTER ENTER Up-Down ENTER ENTER Up-Down ENTER ChPr Chase with 16 steps previously created in REC MODE Speed and Wait time selectable by user CUPr RGBW values selectable by user Rainbow (rAIn) Rainbow colours effect.
DMX Recorder Mode For the programming of ChPr by using a DMX controller, besides the 10 channels necessary to control the unit a further 3 DMX channels are needed. So that in RECORDER mode (via DMX) the unit will need 13 channels to be correctly programmed.
MENU Up-Down ENTER Up-Down ENTER ENTER Up-Down WIRELESS DMX Wireless DMX enabled / disabled. By activating WDMX MODE, it will be possible to control SCENA LED 80 FC via D.T.S. ANTENNA Wireless DMX Transmitter (cod. 03.E1271).
MENU Up-Down ENTER Up-Down ENTER EMERGENCY Emergency operating mode. By setting Emergency mode, it will be possible to select Dimmer intensity level that will then ran if DMX signal is missing or not available. Usefull for Emergency EXIT illumination on public areas. MENU Up-Down Up-Down ENTER ENTER ENTER ENTER ENTER DEFAULT SETTING To restore default settings MENU Up-Down .
11- DMX PROTOCOL 10 CHANNELS MODE (Default) 1 2 3 4 5 6 7 8 9 10 SHUTTER DIMMER RED GREEN BLUE WHITE WHITE PRE-PROGRAMMED CTC MACRO FUNCTIONS DMX CHANNEL 1 DMX range Value Mid Point DMX value 5 14 24 000-009 010-019 020-029 030-119 Parameter: SHUTTER Move Range (degrees) Mode Black-out Open Black-out Strobe at variable speed from slow to fast (3,27 s – 30 ms) Pulse open at variable speed from slow to fast (42,6 s – 120 ms) Pulse close at variable speed from slow to fast (42,6 s – 120 ms) Random
DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL 5 Parameter: BLUE Mid Point DMX value Move Range (degrees) Mode Option Proportional colour 6 Parameter: WHITE Mid Point DMX value Move Range (degrees) Mode Option 7 Parameter: WHITE PRE-PROGRAMMED Mid Point DMX value 23 80 106-155 130 Move Range (degrees) Mode Option 206-255 225 IF CHANNEL 10 (FUNCTIONS) = CUSTOM WHITE CREATE (DMX range value 080-160) 156-205 180 206-255 225 8 Function No Fu
DMX CHANNEL 9 Parameter: MACRO PLEASE CHECK PAGE 11 IF: DMX range Value 000-014 015-029 030-044 045-059 060-074 075-089 090-104 105-119 120-134 135-149 150-164 165-179 180-194 195-209 210-225 226-239 240-255 Mid Point DMX value DMX CHANNEL 9 Move Range (degrees) Mode Option No Function Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Parameter: MACRO PLEASE CHECK PAGE 11 IF: DMX range Value 000-014 015-022
DMX CHANNEL DMX range Value 000-079 10 Parameter: FUNCTIONS (Recall, Create and Store the Custom white) Mid Point DMX value Move Range (degrees) Mode Option Function Custom White Recall (Enable CH 7 for Custom white Recall) Custom White Create (Enable CH 7 for Custom white Creation) Custom White Store (Store the Custom White created) 080-160 161-255 “WALL” 6 CHANNELS MODE (For use with DTS Wall mounted DMX controller 0514L007) MENU 1 2 3 4 5 6 Up-Down ENTER Up-Down 6 CHANNELS ENTER GREE
DMX CHANNEL 4 DMX range Value 000-255 Mid Point DMX value Move Range (degrees) Mode Function Option Proportional dimmer DMX CHANNEL 5 DMX range Value 000-255 Parameter: NOT USED Mid Point DMX value Move Range (degrees) Mode Function Option No Function DMX CHANNEL 6 DMX range Value Mid Point DMX value 5 14 24 000-009 010-019 020-029 030-119 Parameter: DIMMER Parameter: SHUTTER Move Range (degrees) Mode Black-out Open Black-out Strobe at variable speed from slow to fast (3,27 s
DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 3 Parameter: GREEN Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 4 Parameter: BLUE Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 5 Parameter: WHITE Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 4 CHANNELS MODE 1 2 3 4 RED GREEN BLUE WHITE DMX CHANNEL DMX range Value
1 CHANNEL MODE 1 DIMMER DMX CHANNEL DMX range Value 000-255 1 Parameter: DIMMER Mid Point DMX value Move Range (degrees) Mode Function Option Proportional Dimmer 15 CHANNELS MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SHUTTER DIMMER DIMMER FINE RED RED FINE GREEN GREEN FINE BLUE BLUE FINE WHITE WHITE FINE WHITE PRE-PROGRAMMED CTC MACRO FUNCTIONS DMX CHANNEL 1 DMX range Value Mid Point DMX value 5 14 24 000-009 010-019 020-029 030-119 Parameter: SHUTTER Move Range (degrees) Mode Black-ou
DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 3 Parameter: DIMMER FINE Mid Point DMX value Move Range (degrees) Mode Option Function Proportional Dimmer 4 Parameter: RED Mid Point DMX value Move Range (degrees) Mode Option Function Proportional colour 5 Parameter: RED FINE Mid P
DMX CHANNEL DMX range Value 000-255 DMX CHANNEL DMX range Value 000-255 DMX CHANNEL 10 Parameter: WHITE Mid Point DMX value Move Range (degrees) Mode Option Proportional colour 11 Parameter: WHITE FINE Mid Point DMX value Move Range (degrees) Mode Option 12 Parameter: WHITE PRE-PROGRAMMED Mid Point DMX value 23 80 106-155 130 Move Range (degrees) Mode Option 206-255 225 IF CHANNEL 15 (FUNCTIONS) = CUSTOM WHITE CREATE (DMX range value 080-160) 156-205 180 206-255 225 13 Func
DMX CHANNEL 14 Parameter: MACRO PLEASE CHECK PAGE 11 IF: DMX range Value 000-014 015-029 030-044 045-059 060-074 075-089 090-104 105-119 120-134 135-149 150-164 165-179 180-194 195-209 210-225 226-239 240-255 DMX CHANNEL Mid Point DMX value Move Range (degrees) Mode Option No Function Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 14 Parameter: MACRO PLEASE CHECK PAGE 11 IF: DMX range Value 000-014 015-
DMX CHANNEL DMX range Value 000-079 080-160 161-255 15 Parameter: FUNCTIONS (Recall, Create and Store the Custom white) Mid Point DMX value Move Range (degrees) Mode Option Function Custom White Recall (Enable CH 12 for Custom white Recall) Custom White Create (Enable CH 12 for Custom white Creation) Custom White Store (Store the Custom White created)
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S.
