User`s manual

11
Up-Down
MENU
ENTERUp-Down
Up-DownENTER
Up-DownENTER
ENTER
ENTER
ENTER
ENTER
Up-Down
Up-Down
MENU
ENTER
Up-Down
ENTER
Up-Down
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Up-Down
ENTER
Up-Down
ENTER
Standard mode enabled:
(Default).
Extended mode enabled:
Rainbow effects on
MACRO channel.
10- DISPLAY FUNCTIONS
DISPLAY FUNCTIONS
The SCENA LED 80 FC display panel shows all the available functions.
Using these functions, it is possible to change some of the parameters and add some
functions. Changing the D.T.S. setting can vary the functions of the unit so that it does
not respond to the DMX 512 used to control it. Carefully follow the instructions below
before carrying out any variations or selections.
NOTE: the symbol shows which key has to be pushed to obtain the desired
function.
Software version 5.13
REVERSE DISPLAY
Reverses display's reading depending on
the mounting position (on the ground or
suspended).
DISPLAY STAND-BY
To turn off the display (after 5 seconds)
Or leave it always on.
DMX MODE
To select DMX mode: 10 DMX channels
mode (default), 6 DMX channel mode,
15 DMX channels mode, “WALL” mode,
“M4CH” mode, “RGBA” mode or 1 DMX
channel mode.
MACRO
MACRO Function, enable channel mapping
macro rainbow effects
STD (default)
Suspended
Position
Floor
Position
Display
Off
Display
Always on
Default DMX Mode
10 Channels
1 channel mode
6 DMX channels mode
15 DMX channels mode
“WALL” (6 channels mode)
“M4CH” (5 channels mode)
“RGBA” (4 channels mode)