User`s manual

12
With BOOST active, the LED’S
current is set to Max value.
(30% more gain compared to
BOOST Off)
Default = Disabled
Up-Down
MENU
ENTER
Up-Down
Up-Down
Up-Down
Up-DownENTER
ENTER
ENTER
Up-Down
Up-Down
Up-DownENTER
Up-DownENTER
Up-DownENTER
ENTER
ENTER
ENTER
ENTER
Up-DownENTER
ENTER
ENTER
LED
RGBW Min/Max, Smooth,
Compression, Sync and Boost level
values settings
RGBW MINIMUM VALUE
This menu allows to select the
minimum levels for Red, Green,
Blue and White
RGBW MAXIMUM VALUE
This menu allows to select the
maximum levels for Red, Green,
Blue and White
These settings have priority
on Master Dimmer channel
SMOOTH VALUE
This menu allows to select the value
of the delay (in milliseconds) for
Dimmer channel reaction to DMX
or Program variation.
Off = 25 ms Instant response to
DMX variation.
20 = 250 ms Smooth response to
DMX variation.
COMPRESSION
This menu allows to select between
Linear current output or Quadratic
current output for LEDs
Default = Quadratic
SYNC
This menu allows to adjust the PWM
frequency value (Hz) in order to
reduce flickering in the process of
your camera recordings
BOOST DRIVING
This menu allows to increase the
LED’s current from 350mA to
500mA
Linear = Linear
Current output
Quadratic =
Linear light
output
Range: 0-100
Range = Off-20
Default = 4
Range =
610 Hz – 20 KHz
Default = 610 Hz
Boost mode
activated
Boost mode
deactivated