User`s manual

15
MENU Up-Down
Up-DownENTER
Up-DownENTER
ENTER
ENTER
ENTER
WIRELESS DMX
Wireless DMX enabled / disabled.
By activating WDMX MODE, it will be
possible to control SCENA LED 80 FC
via D.T.S. ANTENNA Wireless DMX
Transmitter (cod. 03.E1271).
Active only on SCENA LED 80 FC with
Wireless on board
Wireless
Enabled
Wireless
Disabled
UNLINK = LOG OUT
Logging on SCENA LED 80 FC (WIRELESS DMX must be enabled on SCENA LED 80 FC unit)
To log on the SCENA LED 80 FC in the WIRELESS system simply press and quickly release the function
button on the transmitter.
The transmitter will start flashing rapidly red/green scanning for new free receivers / SCENA LED 80 FC units.
When a SCENA LED 80 FC logs on to the transmitter the LINK green light on transmitter starts to flash
rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data.
The SCENA LED 80 FC now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen on the
transmitter and solid display is seen on SCENA LED 80 FC.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on SCENA LED 80
FC.
To log SCENA LED 80 FC off from a transmitter simply select UNLINK function under
WIRELESS DMX MENU and press ENTER.
When SCENA LED 80 FC is logged off, the display is blinking, meaning its available for log in on a new
transmitter.
Logging out a SCENA LED 80 FC
Select UNLINK function under WIRELESS DMX MENU and press ENTER.
When SCENA LED 80 FC is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out all SCENA LED 80 FC units linked to a transmitter
Press and hold the function button of the transmitter for about 3 seconds. When the display is blinking on
SCENA LED 80 FC, it mean that the units are logged out.
Transmitter, Status LED
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free SCENA LED 80 FC unit, not logged in to any other transmitter,
will be logged on)
SCENA LED 80 FC Status
Display blinking = not logged on to a transmitter (free).
Solid display = logged on to a transmitter and receiving dmx data.