SCENA LED 150 User’s Manual rel. 1.2 GB D.T.S. Illuminazione s.r.l. – ITALY http://www.dts-lighting.
Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della D.T.S . D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto. D.T.
INDEX: 1- SYMBOLS 2- GENERAL WARNING 3- GENERAL WARRANTY CONDITION 4- TECHNICAL FEATURES 5- MAIN ELECTRICAL CHARACTERISTICS 6- ACCESSORIES 7- IMPORTANT SAFETY INFORMATION 7.1 Fire prevention 7.2 Prevention of electric shock 7.3 Safety 8- INPUT / OUTPUT CONNECTIONS 9- DMX SIGNAL CONNECTION 9.1 DMX Addresses 9.
1- SYMBOLS Graphic symbols used on this manual THIS SYMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK ! F 30cm THIS SYMBOL INDICATES GENERAL RISK THIS SYMBOL MEANS “DO NOT PLACE THE UNIT ON INFLAMMABLE SURFACES” THIS SYMBOL INDICATES THE MINIMUM DISTANCE TO BE KEPT BETWEEN THE DEVICE AND THE LIT OBJECT 2- GENERAL WARNING Read the instruction contained in this user manual carefully, as they give important information regarding safety during installation , use and maintenance.
4- TECHNICAL FEATURES OVERVIEW SCENA LED 150 is a compact, lightweight, DMX-controlled theatre projector featuring a single high-power White LED (3.000 °K), a Ø 120 m m PC or Fresnel lens, and a long wide excursion 8,2° - 70° (PC Version) or 12,8 ° - 62° (Fresnel Version) linear motorized zoom with high-efficiency optical system, enabling it to be used as a PC Beam or a very wide Wash.The unit is wireless ready.
LED Technology 1 x White LED 3.000 °K, CRI>90, 7.000 Lumens Also available as 4.000 °K and 5.600 °K LEDs LED Max power: 150W Optical group Linear motorized zoom: PC Version (Ø 120 mm PC lens) from min 8,2° (1.
6- ACCESSORIES As standard 1 x User’s Manual 1 x POWERCON male cable connector (D.T.S. Code: 0520P014) 1 x XLR 5 pins male cable connector (D.T.S. Code: 0508B028) 1 x XLR 5 pins female cable connector (D.T.S. Code: 0508B027) 1 x Filterframe for SCENA LED 150 *Black finish (D.T.S. Code: 02M00416.46) Optional (on request) * “C” Clamp G60 (Max. Load. 50 Kg) *Black finish (D.T.S. Code: 0521A004) * “C” Clamp G60 (Max. Load. 50 Kg) *Chrome finish (D.T.S. Code: 0521A004.
7- IMPORTANT SAFETY INFORMATION 7.1 Fire prevention: Never locate the fixture on any flammable surface. Minimum distance from flammable materials: 10 cm. F Minimum distance from the closest illuminable surface: 30 cm. 30cm Replace any blown or damaged fuses only with those of identical value (3,15 AT). 7.2 Prevention from electric shock: High voltage is present inside the unit. Unplug the unit prior to performing any operation which involves touching the inside of the unit.
9- DMX SIGNAL CONNECTION: The unit operates using a digital DMX 512 signal. Connection between the controller and the unit or between units must be carried out using a two pair screened ø 0.5 mm. Ensure that the conductors do not touch each other. Do not connect the cable ground to the DMX connector chassis. The plug housing must be isolated.
9.1 DMX addresses SCENA LED 150 can be controlled with 4 DMX channels. In order to use the unit in 4 channels, set the following addresses on the mixer: Projector 1 Projector 2 Projector 3 ….. A…. projector 6 A001 A005 A009 If you want to select the next projector, just add “4” A021 9.2 Selecting the DMX address 1) Press the UP-DOWN key until you reach the required DMX address. The numbers on the display will start to flash (but the new DMX address hasn't yet been set).
11- DISPLAY FUNCTIONS DISPLAY FUNCTIONS The SCENA LED 150 display panel shows all the available functions . Using these functions, it is possible to change some of the parameters and add some functions. Changing the D.T.S. setting can vary the functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully follow the instructions below before carrying out any variations or selections. NOTE: the symbol shows which key has to be pushed to obtain the desired function.
MENU Up-Down ENTER LED Led Min/Max, Smooth, Compression, Sync and Boost level values settings Up-Down Up-Down Up-Down LED MINIMUM VALUE This menu allow to select the minimum levels for white Up-Down Default = 0 ENTER Default = 100 ENTER ENTER Up-Down ENTER Up-Down Quadratic = Linear light output Linear = Linear Current output LED MAXIMUM VALUE This menu allow to select the maximum levels for white These settings have priority on Master Dimmer channel Range = Off-20 Default = 4 Up-Dow
MENU Up-Down ENTER Up-Down ENTER ENTER Up-Down ENTER WIRELESS DMX Wireless DMX enabled / disabled. By activating WDMX MODE, it will be possible to control SCENA LED 150 via D.T.S. ANTENNA Wireless DMX Transmitter (cod. 03.E1271).
MENU Up-Down ENTER Up-Down ENTER EMERGENCY Emergency operating mode. By setting Emergency mode, it will be possible to select Dimmer intensity level that will then ran if DMX signal is missing or not available. Usefull for Emergency EXIT MENU Up-Down ENTER Up-Down ENTER ENTER ENTER Default = 255 ENTER DEFAULT SETTING To restore default settings MENU Up-Down .
12- SERVICE MENU For technical personnel only To operate this menu: -Connect the unit to the main -While reset is running, press the MENU and ENTER keys at the same time. ENTER ENTER Up-Down LENS PC or Fresnel lens selection ENTER ENTER ENTER Up-Down PRODUCT Product model selection SCENA LED 150 (Default) or PROFILO LED 150 ENTER . Up-Down ENTER CURRENT From min 20 mA to max 600 mA Default = 300 mA ENTER Up-Down . ENTER . ENTER .
ENTER ENTER RESM To restore service and user default settings ENTER EXIT Exit from service menu 13- DMX PROTOCOL 4 CHANNELS MODE (Default) 1 2 3 4 SHUTTER / STROBE DIMMER ZOOM RESET DMX CHANNEL 1 DMX range Value Mid Point DMX value Parameter: SHUTTER / STROBE Move Range (degrees) Mode Option 000-009 010-019 020-029 030-119 120-149 150-179 Black-out Open Black-out Strobe (from 3.27 s to 30 ms) Pulse up (from 42.6 s to 120 ms) Pulse down (from 42.
2 CHANNELS MODE 1 2 DIMMER ZOOM DMX CHANNEL 1 DMX range Value Mid Point DMX value Parameter: DIMMER Move Range (degrees) Mode Option 000-255 Function Proportional dimmer DMX CHANNEL 2 DMX range Value Mid Point DMX value Parameter: ZOOM Move Range (degrees) Mode Option Function Linear ZOOM from Narrow to Wide (8,2° - 70° PC lens ; 12,8° - 62° FRESNEL lens) 000-255 1 CHANNEL MODE 1 DIMMER DMX CHANNEL 1 DMX range Value Mid Point DMX value 000-255 Parameter: DIMMER Move Range (deg
NOTES
NOTES
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S.
