Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
97 Document #: 9301E692002.1
7.6.1.1. Input Control Pins
This menu is used to assign functions to input control pins. The assigned function is executed when a
low level pulse is detected on the corresponding input pin. There are three separate input pins that can
be assigned. When entering this menu, the current assignments are displayed next to the pin number,
as shown below.
INPUT CONTROL PINS
► In 1: Unassigned
· In 2: Unassigned
· In 3: Unassigned
· Exit Menus
Main Menu → Setup → Automation → I/O Control → Pin Definitions → Inputs
To change the pin assignment, move the cursor to the desired pin number and press Enter. A menu
appears with all of the available input pin assignments, as shown below:
Change In 1
► (*) Unassigned
· ( ) Start Preshow
· ( ) Stop Video
· ( ) Lang Setup
· ( ) S/PDIF On
· ( ) S/PDIF Off
· ( ) Intermission
· ( ) Playlist C
· ( ) Playlist D
· ( ) Playlist E
· ( ) Playlist F
· ( ) Playlist G
· ( ) Stop at End
· ( ) Video Lmp On
· ( ) Video Inh
· ( ) Slide Loop
( ) ACV
( ) 70mm TCR
· Exit Menus
Options:
Unassigned A pulse on this pin is ignored by the XD10.
Start Preshow Starts the video Preshow.
Stop Video Stops the video playlist.
Lang Setup Activates a specified soundtrack language and subtitle
language. Refer to Section 7.6.3.1 in order to select a
desired language. This pin must be held low in order to
activate the assigned language.