Specifications
XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
xi Document #: 9301E692002.1
Installation Checklist
Use these checklists to make sure that important settings are completed before playing content to an
audience. There are separate checklists for installing the XD10, CSS Option and Video Option.
Table 1. XD10 Installation and Setup
Completed Task
Install XD10 in Equipment Rack Section 5.2.1, XD10 Player Installation
Install DTS Timecode Reader Head onto
Projector(s)
Section 5.2.3, DTS Timecode Reader Head
Installation
CONNECT CABLING:
Power Cable Appendix D, Cable Assemblies and Breakout
Cards.
DTS Timecode Reader Head Interconnect
Cable to XD10 Timecode Connector
Appendix D, Cable Assemblies and Breakout
Cards.
Cable from XD10 Automation to Cinema
Processor
Appendix B, Interface to Cinema Processors.
Audio (analog output) Cable from XD10
Analog Out to Cinema Processor
Appendix B, Interface to Cinema Processors.
PROGRAMMING STEPS
Automation Setup: Pin Definitions,
Fallback Formats, and Operating Modes
Section 7.5, Automation Controls
I/O Control: Pin Definitions and Language
Setups
Section 7.6, I/O Control
Automation Test Section 7.6.5, Automation Test
Language Versions: Enable? Section 7.2.3, Language Versions
Use Automated Language Setups? Section 7.6.3, Language Setups
If Used, Enable/Disable Network
Communication
Section 7.8.1, Network Mode
Set System Clock: Set Time Zone, Date
and Time.
Section 7.9, System Clock
Set Password to Prevent Unauthorized
Access, if Appropriate.
Section 7.7.1.10, Set Password.
ADJUST AND TEST
Set and Adjust XD10 Sound Levels Section 7.2.1, Level Adjustment
Set Timecode Reader Sync Adjustment Section 5.5, Timecode Reader Sync Adjustment
Verify Sound Performance Section 5.6.1, Verify Sound Performance
Perform Audio Tests Section 7.2.2, Audio Tests
Load Cinema Feature / Trailer Disc(s) Section 2.3, Loading Content
Check Automation Fail-Safe (Default)
Operation
Section 5.7, Check Automatic Fail-Safe (Default)
Operation