Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
104 Document #: 9301E692002.1
7.6.4. Playlist
The playlist setup is a series of menus used to set the delays and options for the video playlist. To
access the Playlist menu, select Playlist from the Automation /Control menu, as shown below:
AUTOMATION / CONTROL
• Format
• I/O Control
► Playlist
• Test
• Exit Menus
Main menu → Setup → Automation
The Select Playlist menu, shown below, appears on the screen.
Select which
Playlist to
Configure:
<Playlist options>
Main menu → Setup → Automation → Playlist (Select Playlist)
Options:
Preshow Select to edit the automation options for the Preshow playlist.
Intermission Select to edit the automation options for the Intermission
playlist.
Playlist C-G Select to edit the automation options for Playlists C - G.
Use the up and down arrow buttons to display the desired playlist and then press Enter to edit the
Playlist Automation option. Edit the option with the correct selection for that playlist. The following
values may be set for each type of playlist:
• Video Start Delay (0 to 120 seconds)
• Start Pulse Enable
• Start Pulse Delay (0 to 120 seconds)
• End Pulse Enable
• End Pulse Delay (-60 to +60 seconds)
• Lamp off command at end of playlist
• End of playlist format
• Format for silent video clips
• Loop at end of playlist