Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
105 Document #: 9301E692002.1
7.6.4.1. Video Start Delay
The Video Start delay is the amount of time the XD10 waits after receiving the “start” command (to
start playing videos from the playlist). This is used to allow the video projector lamp time to
warm up.
<Playlist> Setup
Video Start
Delay:
[100] Seconds
Main menu → Setup → Automation → Playlist (Option 1)
Options:
0 to 120 Number of seconds the XD10 waits for the projector to warm up.
7.6.4.2. Output Start Pulse Enable
This menu defines whether the start pulse will be used for this playlist type. The start pulse must also
be defined as one of the XD10 Control Output Pins. See Section 7.6.2, Output Control Pins.
<Playlist> Setup
Output Start
Pulse:
[Enable/Disable]
Main menu →> Setup → Automation → Playlist (Option 2)
Options:
Enable Start pulse is enabled. Pulse timing is determined by the start
pulse delay.
Disable Start pulse is not used for this playlist.
7.6.4.3. Start Pulse Delay
This menu allows you to select the start pulse delay time to any time within the first 120 seconds after
the start of the playlist.
<Playlist> Setup
Start Pulse
Delay:
[ 60] Seconds
Main menu → Setup → Automation → Playlist (Option 3)
Options:
0 - 120 Number of seconds delay after the playlist starts before the start
pulse occurs.
Disable Start pulse is not used for this playlist.