Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
108 Document #: 9301E692002.1
7.6.5. Automation Test
This menu is used to confirm the assignments already made to automation pins 1-8, I/O Control pins
1-3, and pin 4, and the signal from the Cinema Subtitling Projector fan.
Automation Test
Fmt:-------- In:*---
[Pin 1: Mono ]
[Enter] to Pulse
Main Menu → Setup → Automation → Test
Options:
▲ or ▼ Select between automation format pins 1-8 and (I/O) output 1-4 on line 3.
Enter Pulse the format or I/O output pin as identified by line 3 of the display.
Line 2 of the display is a status indicator for the sound format and (I/O) input control pins. An active,
or low, status, is indicated by the '*' character. Otherwise the '-' character is displayed. The status of
automation (sound) format pins 1-8 are displayed in order following the text "FMT:' The first
character after the text "IN:" is the EMA fan sense input, followed by (I/O) outputs 1 through 3 in
numerical order.
7.7. System Settings
To access the System Options menu, select System from the System Setup Menu, as shown below.
SYSTEM OPTIONS MENU
► USB Memory
• COM1 Configuration
• Set Password
• Network
• System Clock
• Revert
• Exit Menus
Main Menu → Setup → System
Options:
USB Memory Store and load configuration or files to USB memory device.
COM1 Config Select use for COM1.
Set Password Set the password to enter the Setup menus.
Network Set network parameters.
System Clock View or change the XD10 time and date.
Revert Revert to the previous software version.
Exit Menus Return to the status display.