Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
109 Document #: 9301E692002.1
7.7.1. USB Memory
The USB memory menu allows you to save configuration settings from the XD10 hard drive onto a
memory device inserted into the USB port.
The memory device (commonly called a “memory stick”) can hold settings for several XD10 units.
The number of units depends on the size of the memory device. The configuration file size of one
XD10 unit is approximately 12K.
USB Memory
► Configuration
• Master Settings
• Copy
• Log Files
• Exit Menus
Main Menu → Setup → System → USB Memory
Options:
Configuration Save or load XD10 configuration files and licenses.
Master Settings Save or load XD10 master configuration settings.
Copy Copy files to a USB memory device and restore them at a later time.
Log Files Copy the XD10 log files to a USB memory device.
7.7.1.1. XD10 Configuration
This menu allows you to save the XD10 configuration and licenses on a USB memory device. A
folder is created on the USB memory device when saving the configuration. The folder is given the
name “XD10-xxxxxxxxxxx”, where “xxxxxxxxxxxx” is the MAC address specific to that XD10.
The configuration for several machines may be saved on the USB, each one in the folder named with
its unique MAC address. When loading the Configuration through the USB, the XD10 will load only
the configuration from the folder named with that XD10’s MAC address.
If you want to save settings from one XD10 and load them into a different XD10, see “Master
Settings” after this section.
XD10 Configuration
► Save on USB
• Load from USB
• Exit Menus
Main Menu → Setup → System → USB Memory → Configuration
Options:
Save on USB Save XD10 configuration files on a USB memory device.
Load from USB Load configuration files from a USB memory device to an XD10.