Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
3 Document #: 9301E692002.1
1.1.3. LED Indicators
The table below describes the LED functions on the XD10 front panel.
Table 4. Front Panel LED Indicators
LED Color Indication
DTS
PLAYBACK
Blue Light is continuous if XD10 is playing DTS audio.
Light blinks if XD10 is playing DTS audio, but DTS format is not
selected.
TIMECODE Green Reading valid timecode from the reader head.
VIDEO Green Playing video playlist or test material.
NARRATION Green Playing narration track to timecode.
SERIAL Green Serial text for data wall
CSP TEXT Green Playing CSS subtitles or captions.
CSP LAMP
FAULT
Red If flashing, CSS projector lamp needs to be replaced.
If continuous, lamp has failed.
1.1.4. LCD Screen
1.1.4.1. LCD Modes
The liquid crystal display (LCD) screen on the front panel of the XD10 operates in two modes:
• Status mode. During playback, the screen displays information about the content currently being
played.
• Menu mode. In menu mode, the screen displays menus that can be used to view and adjust
playback settings.
The XD10 front panel keypad may be used to switch the display between the status mode and menu
mode.
1.1.4.2. Status Display
The XD10 status display reads “Ready” when the XD10 is ready to play but not actively receiving
timecode or playing in DTS or video content.
When the XD10 receives timecode, the status display shows the following 4 lines, as shown in the
screen below.
• Line 1: Title of film or trailer
• Line 2: Serial number in the timecode that identifies the film.
• Line 3: Timecode reel number and elapsed timecode
• Line 4: Configurable information line
Buzz and Bill Show
SN=00001
Reel #01 00:41:28
R1 end: 08:24:01