Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
21 Document #: 9301E692002.1
2.8. Video Projector Support
This software supports the following video projectors:
• Sanyo PLV-70
• Sanyo PLV-WF10
The software is designed to work in a fully automated fashion with these projectors. These projectors
are controlled via the XD10 serial port to support the following functionality:
• Auto-detect which video projector is connected.
• Read lamp and projector hours. These values are placed in the playlist log.
• Save video projector settings to the XD10.
• Restore video projector settings. The projector settings are sent to the video projector
whenever the playlist starts and its lamp is lighted. The settings are not sent when the video is
played through the video test menu. This allows you to use the test menu to adjust the
projector settings on the video projector. Then you can use "Get Settings" menu command to
save the video projector settings.
Video projectors not listed can be used, but the XD10 will not have the functions listed
above and will require an external automation controller to turn their lamps
on and off.