Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
22 Document #: 9301E692002.1
2.8.1. Video Projector Settings
The following table lists the video projector settings that are saved by the menu command and restored
for each playlist. Some settings are forced to a certain value on the projector.
Option Value Comment
BRIGHT Brightness 000-063 Save/Restore Settings
CONT Contrast 000-063 Save/Restore Settings
COLOR Color 000-063 Save/Restore Settings
TINT Tint 000-063 Save/Restore Settings
SHARP Sharpness 000-015 Save/Restore Settings
GAMMA Gamma 000-015 Save/Restore Settings
WBAL-R White balance, red 000-063 Save/Restore Settings
WBAL-G White balance, green 000-063 Save/Restore Settings
WBAL-B White balance, blue 000-063 Save/Restore Settings
COLORTEMP Color temp 000-003 Save/Restore Settings
FANSPEED Fan Control Speed Save/Restore Settings
KEYSTONE Keystone setting Save/Restore Settings
CEIL When ON, image is top/bottom inverted Save/Restore Settings
REAR When Rear is ON, image is left/right reversed Save/Restore Settings
NZRED noise reduction ON/OFF Force OFF
PROGV progressive scan ON/OFF Force ON
IMAGE image mode (STAND, REAL, CINEMA, IMAGE1, IMAGE2,
IMAGE3, IMAGE4)
Force STAND
INPUT Select input 1-3 Save/restore
SOURCE Select Input source DIGITAL, ANALOG, VIDEO, SVIDEO, YC,
YPBPR, YCBPR, YCBCR, HD-SDI, SD-SDI
Force Digital
SYSTEM SYSTEM OF CURRENT INPUT AUTO, NTSC, NTSC443, PAL,
PAL, SECAM, PAL=M, PAL-N, 1080I60, 1080I60, 1035I, 720P,
575P, 480P, 575I, 480I
Force AUTO
SCREEN NORMAL (4:3), FULL (16:9) Force Full
TRUE ON - Select TRUE, OFF - Cancels TRUE Force ON
DISP Set/Cancel Display Force Off - Only on
Projector 1
BBACK Turn on/off Blue background Force Off - Only on
Projector 1
LOGO Turn on/off Logo Display Force Off - Only on
Projector 1
LAMPMODE Full or Half Force Full, only works on
WF-10.