Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
26 Document #: 9301E692002.1
•(*) Slide Loop
•( ) Preshow
•( ) Intermission
•( ) Playlist C
•( ) Playlist D
•( ) Playlist E
•( ) Playlist F
•( ) Playlist G
• Exit Menus
Main menu → Playback → Video → Start
To start a playlist, scroll to the desired playlist type and press Enter. The selected playlist will begin
and the asterisk will move to the left of the selection.
The playlist will not start while the XD10 is receiving timecode or the Video Inhibit signal is active.
Provided that the start command has been given through automation, the XD10 will automatically start
after timecode has stopped for 10 seconds as long as the timecode ends within one minute of the
command being given.
All of these playlist functions are also available as automation controls.
Note: If no playlist is loaded, the XD10 executes the entire automation sequence (lamp on,
start pulse, lamp warm-up delay) without playing any video.
3.2.1.2. Stop Playlist
Stop Playlist
•(*) Stop
•( ) Stop at End
• Exit Menus
Main menu → Playback → Video → Stop
Commands:
Stop Immediately stops the playlist that is currently playing.
Stop at End Stops the playlist that is currently playing once it reaches the end of the
current clip.
These functions are also available as automation controls.