Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
49 Document #: 9301E692002.1
4.4. Display Error Messages
4.4.1. Program Fault
The following message will appear on the XD10 front panel display if the XD10 program stops
running or gets “hung up” for any reason (an unspecified problem with the unit).
Error Detected
Program Fault
Player Disabled
If this occurs when playing digital format, the XD10 will switch the cinema processor to the
predefined fallback format (usually SR).
The error may disappear or the XD10 may reset itself after power is cycled (power off, then on again).
However, if the problem persists, contact DTS Technical Service for assistance at 1 [phone]
from within the USA or 1(818) 401.4253 from outside the USA.
4.4.2. Menus Do Not Function
Certain menus on the XD10 are locked out because the functions are disabled, either due to a mode
setting, or because a license is required.
1. The following message appears when Video Playlist is selected from the Playback menu—or
Video is selected from the Setup menu—and the Video license is not installed on the XD10.
Video playback
is not enabled.
License required.
Main menu → Playback → Video
2. The following message appears when Video Playlist is selected from the Playback menu—or
Video is selected from the Setup menu—and the video hardware is either not installed or not
working.
Video Hardware
is not installed.
Main menu → Playback → Video