Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
68 Document #: 9301E692002.1
The following menu displays once the System Setup password is entered:
SYSTEM SETUP MENU
• TC Reader Offset
• Audio
• Video
• CSS
• Automation
• System
• Display Language
• Exit Menus
Main Menu → Setup
System Setup Sub Menu Overview:
TC Reader Offset Enters menu to set the timecode reader offset. This must be set
for playing Soundtrack and CSS content to properly synchronize
the content to the film.
Audio Sets test audio levels, plays audio test files and enables/disables
language selection. The Language Versions should be enabled in
areas where different languages should be played. The audio
levels and test files are used to set audio for either soundtrack or
video with audio.
Video Enters menu to set the parameters for the Video projector. This
menu is available only with the HD Video Option.
CSS Enters menu to set the parameters for the projected CSS subtitles
or captions. There are no configurable items for narration and
Rear Window™ in this menu. This menu is available only with
a valid CSS license.
Automation Contains the following configuration items: 1) Format
automation pin definitions and operating modes, 2) Define
functions for general purpose input and output control pins, 3)
Configure Video Playlist Automation parameters, 4) Define
automated language setups for soundtrack and/or CSS subtitles.
This menu also contains a menu to test format automation
signals and I/O control signals.
System Contains menus for the following system operations: 1) USB
memory device operations to save or restore configurations, or
save log files, 2) Configure COM1 for use by the Video
Projector or CSS Rear Window™, 3) Set the setup menu
password, 4) Set system network parameters, 5) Set XD10 time
and date, 6) Revert to an earlier XD10 software version.
Display Language Enters menu to change the language used on the XD10 LCD to
one of the following: English, French, German, Italian, or
Spanish.