Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
71 Document #: 9301E692002.1
7.1.2.2. SMPTE: Reel Number
This menu assigns a DTS reel number to the incoming SMPTE timecode. If the value is set to zero,
then the hours value from the incoming SMPTE timecode will be used for the reel number. The reel
number must be set to 1 in order to play long audio files (greater than one hour in length).
Reel Number
R0 => Use Hours
[ Reel 0 ]
Main menu → Setup → TC Reader Offset → SMPTE → Reel Number
7.1.2.3. SMPTE: Offset
This menu sets an offset to the incoming SMPTE timecode. It does not have any affect when playing
DTS timecode. The offset can be set to plus or minus value.
Offset
- [00:00:08:00]
*
Main menu → Setup → TC Reader Offset → SMPTE → Offset
The fields set are [plus/minus] [Hours]:[Minutes]:[Seconds]:[Frames]. The asterisk on the bottom
line is positioned below the field that will be modified.
Commands:
Right Move asterisk (cursor) one position to the right.
Left Move asterisk (cursor) one position to the left, or return to previous menu if at the
left most position.
Up Increment serial number by 1 value of number at asterisk position .
Down Decrease serial number by 1 value of number at asterisk position .
Enter Return to the previous menu.