Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
72 Document #: 9301E692002.1
7.2. Audio Setup Menu
This menu allows you to set up and test the XD10 audio. It also allows you to enable or disable the
Language Versions function.
AUDIO SETUP MENU
► Level Adjustment
• Audio Tests
• Language Versions
• Exit Menus
Main menu → Setup → Audio
Commands
Level Adjustment Adjust sound levels using audio generated by the XD10.
Audio Tests Play preloaded audio tests.
Language Versions Enable or Disable the language versions function.
7.2.1. Level Adjustment
This menu is the first in a series of menus for setting the XD10 audio output level.
Select Audio
• Reference Tone
• Pink Noise
Main menu → Setup → Audio → Level Adjustment
Commands
Reference Tone Play 1 kHz reference tone on all channels for adjusting the level.
Pink Noise Play pink noise on the current channel for adjusting the level.
Select either Reference Tone or Pink Noise to use the level adjustment menu. Reference tone is a 1
kHz test tone that has been preset at 300mV RMS when the output is set to 0.0 dB. This is what most
cinema processors suggest for input. Alternatively, Pink Noise may be used to verify level outputs on
the XD10. It is played only on the channel chosen for adjustment. The level adjustments are made the
same, regardless of whether you are using the reference tone or pink noise selection. The pink noise
for the Sub bass channel is not bandwidth limited.
For example, if you select Reference Tone for the left channel (ch1), the following message will
appear on the XD10 status display.