Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
78 Document #: 9301E692002.1
7.3.1.4. Video Resolution
This menu is used to set the video output resolution. In most cases this should be set to the native
resolution of the video projector. Changing the video output resolution requires that both a resolution
and a frame rate be selected. For this reason, the frame rate menu will appear after the resolution is
changed and the user exits this menu. The table on the following page lists all available resolutions
and frame rates.
Set Video Resolution
•(*)640x480
•( )800x600
•( )1024x768
•( )1280x720
•( )1280x768
•( )1280x1024
•( )1360x768
•( )1366x768
•( )1600x1200
•( )1920x1080
•( )1920x1200
Frame Rate
Main menu → Setup → Video → Output → Resolution
7.3.1.5. Video Frame Rate Menu
This menu is used to set the video frame rate. The options are displayed in frames per second with an
“i” indicating interlaced, and “p” indicating a progressive frame rate.
The frame rates available depend on the selected resolution, and the video resolution must be set
before setting the frame rate. The frame rate menu displays the current resolution on the menu title.
The menu below shows the default frame rate menu for the resolution of 1920x1080. Table 9, on the
following page, lists all frame rates available for each resolution.
1920x1080 Options
•(*)23p
•( )24p
•( )25p
•( )29p
•( )30p
•( )47i
•( )48i
•( )50i
•( )59i
•( )50p
• Frame Rate
• Exit Menus
Main menu → Setup → Video → Output → Frame Rate