Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
81 Document #: 9301E692002.1
7.3.3. Video Projector
This menu provides functions to setup the serial control for the video projector.
Video Projector
• Select Projector
• Lamp On/Off
• Save Settings
• Exit Menus
Main Menu → Setup → Video → Projector
Commands
Select Projector Select a profile for the serial control of the video projector.
Lamp On/Off Test the lamp on/lamp off serial control function.
Save Settings Create a copy of the projector settings on the XD10. The settings are restored to the
projector upon the start of any video playlist.
Note: In order for the XD10 to control the projector through the serial interface you also need to set
the serial port for Video Projector (not Rear Window).
Main MenuÆSetup
ÆSystemÆCom1ÆConfigurationÆVideo Projector.
7.3.3.1. Select Projector
This menu selects the profile for the serial control of the video projector. By default No Projector is
selected. If no projector is selected the XD10 can still play video through the projector, but won’t be
able to do some things automatically like turn the lamp on and off, or restore the saved projector
settings.
By default, the projector profiles for the Sanyo PLV-70 and PLV-WF10 Projectors are included in the
XD10 software. Additional projector profiles can be created and loaded onto the XD10 through the
CD-ROM or USB memory. Contact DTS Customer Service.
Select Projector
•(*)No Projector
•( )plv-wf10
•( )plv70
# # #
Main Menu → Setup → Video → Projector → Select Projector