Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
82 Document #: 9301E692002.1
7.3.3.2. Lamp On/Off Control
This menu may be used to turn the video projector lamp on and off during testing or setup.
Video Lamp
•(*)On
•( )Off
• Exit Menus
Main menu → Setup → Video → Projector → Lamp on/off
Commands:
On Select On to turn the projector lamp on.
Off Select Off to turn the projector lamp off.
NOTE 1: The video projector may take one to two minutes to respond to the Lamp On
command when the lamp is still warm from use.
NOTE 2: Only available for projectors supported by XD10 serial control.
7.3.3.3. Save Video Projector Settings
The Save Settings menu is used to save or delete projector settings.
Save projector
settings?
• (*) Yes
• ( ) No
• Exit Menus
Main menu → Setup → Video → Projector → Save Settings
To save the settings, select “Yes” and press Enter. The following message will appear if the operation
is successful.
Projector settings have
been saved
On XD10.
Press [Enter]
Main menu → Setup → Video → Projector → Save Settings → Yes
The following message will appear if “No” is selected or if the communication to the projector was
unsuccessful:
Projector settings
have not been saved
on XD10
Press [Enter]
Main menu → Setup → Video → Projector → Save Settings → No
Only available for projectors supported by XD10 serial control.