Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 2.1
85 Document #: 9301E692002.1
7.4.1. Image Size
This menu allows you to select the size of subtitles/captions from the available sizes supplied on the
DTS subtitle or DTS Access™ disc. Check the disc label to see what sizes are available on the
distributed subtitles/captions. If you select a smaller size, and it is not available, the system will assign
the next smallest size available. (The CSS content delivered on the disc may not contain all sizes.)
Image Size Menu
• ( )100%
• ( )90%
• ( )80%
• ( )70%
• ( )60%
• ( )50%
• Exit Menus
Main menu → Setup → CSS → Image Size
Options:
Image Size From 50% to 100% of size available for text for
subtitles/captions. (Sizes listed on the menu may not all be
available in the CSS content delivered on the disc.)
7.4.2. Vertical Offset
This menu allows you to make fine adjustments to the vertical placement (in pixels) of CSS subtitles.
When you enter this menu, the XD10 projects a subtitle area pattern to use to reference the position.
When installing the projector, set the projector vertical offset to 0 and physically position the projector
to project in the subtitle area. Then use this menu to make fine adjustments.
Set Projector
Vertical
Offset
[ 0 ] pixels
Main menu → Setup → CSS → Vertical Offset
Options:
▲
Move subtitle area up one pixel. Press and hold ▲ to increase
continuously.
▼ Move subtitle area down one pixel. Press and hold ▼ to increase
continuously.
Enter Return to CSS Setup menu.