Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
G. Cinema Subtitling System (CSS) Option
Appendix
The DTS Model DTS-CSP subtitle projector can be mounted in the projection booth or in the auditorium.
For most theaters, it will be in the projection booth. It is used to project subtitles that are supplied by the
XD10 software. The subtitle video is downloaded into the XD10 from a “show disc.” Then the operator
chooses the language desired for the subtitles, from the Playback | CSP Language menu, or
chooses Automation to automate the subtitles selection process. Once the film is started, the
correct subtitles are projected in sync with action on-screen.
Along with the DTS-CSP, there is a special external mask assembly DTS-EMA and its mounting
hardware.
• The DTS-EMA consists of a bracket, douser, cooling fan, and adjustable magnetic trims. (See
parts lists in Appendix A.)
• The mounting hardware consists of a mounting plate, shaft, and clamp. The mounting plate
attaches directly to a wall or ceiling, and the clamp attaches directly to the DTS-EMA. (See
parts lists in Appendix A.)
G.1. DTS-CSP Subtitle Projector
Available Projectors DTS-CSP (for throws up to 50 feet, standard “short throw”)
DTS-CSPL1 (for throws up to 120 feet, “long throw”)
Physical Dimensions Height: 4 inches (10.16 cm)
Width: 9 inches (22.86 cm)
Depth (short throw): 12 inches (30.48 cm)
Depth (long throw): 14 inches (35.56 cm)
Weight (projector only, short throw) 6.0 lbs. (2.72 kg)
Weight (projector only, long throw) 8.0 lbs. (3.63 kg)
Operating Case Touch Temperature 194
0
F (90
0
C)
Power Requirements 100 to 240 VAC, at 50 to 60 Hz
Power Consumption 400 watts
Lamp Replacement Every 1400 hours (Lamp module Part # 1802 0001 00)
G.1.1. Projector Air Space Requirements
To avoid overheating of the projector, adequate airspace is required. Six inches (15.24 cm) are required
on all sides (left, right, front, and rear) and 12 inches (30.98 cm) is required above and below.
Note: All projector vents and the external blower must NOT be obstructed in any way, to
ensure free airflow for cooling.
G.2. DTS-EMA Mounting
DTS-EMA external mask assembly / mount adapter PN 9001DEMA00A includes the external mask
assembly and mount adapter, which attach to the projector, and the hardware that attach the projector and
EMA to the projection booth wall or ceiling.
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-1