Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
Figure 1. Arm must pivot upward, when mounting foot is attached to EMA.
b. Secure mounting foot to EMA chassis using the 3 metric (M6) screws (Figure 2).
Figure 2. Secure mounting foot to EMA chassis
c. Tighten setscrew to tighten arm in foot using 5/32 inch (13.1 mm) hex driver.
The 3 metric oval-head Phillips screws may seem difficult to insert. This is because the 3
nuts on the EMA are elliptical, not round, to provide greater retention force. Because of
the greater force required for insertion, be careful not to cross-thread the screws.
Figure 3. Tighten setscrew.
d. Using the hardware provided, connect the arm to the support bracket.
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-9