Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
9. Replace the lamp door by inserting the hooks on the lamp door into the slots on the projector and
pressing the lamp door into place. The arrow on the lamp door should point to the lock icon on
the bottom of the projector. If the lamp door does not fit properly or bulges out, remove the door
and re-seat the lamp module.
10. Plug in the power cord and press the green POWER ☼ button to turn on the projector.
G.7.1. Reset the Lamp Hour Counter on the Projector
1. On the projector keypad, press and hold the MENU  button until the LED flashes.
source
standby
volume +volume -
menu
power
Press both down and
hold for 5 seconds.
LED
keypad
2. While LED flashes, press and hold
both the SOURCE  and
VOLUME – ; buttons.
Hold for 5 seconds. This will reset
the counter.
3. Verify the projector lamp counter
was reset by viewing the Current
Lamp Hours display in the XD10
CSP Lamp Status menu.
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-20