Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-26
2. Run the audio test “Alignment Tones”. This is accessible from the System Setup | Audio Setup |
Audio Tests Menu. The XD10 should output a 1kHz reference tone on the narration output.
3. Use a voltmeter to verify 300 mV RMS ± 10 mV at the NARR connector on the rear of the
XD10.
4. Reconnect the NARR connector on the rear of the XD10.
5. Play the test film “Bill and Buzz”.
6. The test narrative should be heard clearly in the narration headsets. Verify the narration is
synchronized with the projected image. If NOT, the most likely problem is the timecode reader
offset is incorrect. (If adjustment is needed, see TC Reader Offset, in chapter 1, for details.)
G.14. Testing Rear Window Captions
1. Verify COM 1 cable is securely connecting the XD10 to the caption system.
2. Play the test film “Bill and Buzz”. The test captions should appear on the scrolling display at the
rear of the theater.
3. Using the Plexiglas viewer, sit in the theater and verify the captions are clear and easy to read.
Verify the captions are synchronized with the projected image. If NOT, the most likely problem
is the timecode reader offset is incorrect. (If adjustment is needed, see TC Reader Offset, in
chapter 1, for details.)