Specifications

TITLE
Reader Head LED Voltage Calibration
NUMBER
TN-E550
REV
A
Page 3
of 3
DATE PREPARED
August 6, 2002
CREATED BY:
K. Hultgren
EFFECTIVE DATE
8/7/02
APPROVED BY:
B. Plunkett
DTS, 5171 Clareton Dr., Agoura Hills, CA 91301 Contact Document Control for the latest revision.

After adjustments are complete, reattach the back cover using the saved hex screws. Tighten all set-
screws on the reader and check that all rollers rotate freely and do not wobble. Check that the reader’s
mounting bracket is tightly fastened to the projector and that the reader is securely attached to the
bracket.
Two set-screws to secure rollers One set-screw to secure auxiliary roller
Please refer questions to DTS Cinema Technical Support
Telephone: [phone] or [phone]
Fax: [phone]
Email: [e-mail]
www.dtsonline.com